Engineering topics

Arepalli, Sivaram

Publications and source records attributed to Arepalli, Sivaram.

40 records · Page 3

NASA NTRS1990

Application of Laser Induced Fluorescence for flow diagnostics in arc jets

Laser Induced Fluorescence (LIF) studies are carried out on copper atoms, nitric oxide and oxygen molecules in the arc jet flows at the NASA Johnson Space Center Reentry Simulation Testing Facility. Measurements are taken in the free stream and from a blunt body shock layer. Tests are performed under different flow conditions to determine the feasibility and sensitivity of the LIF technique for various species. The LIF technique is developed as a part of high enthalpy flow diagnostics and will be useful to elucidate the rotational and vibrational temperatures. Adequate sensitivity for the detection of O2 and NO is demonstrated. Preliminary experiments for temperature and velocity measurements using copper as a tracer material are shown to be a useful new application of the laser resonant Doppler scattering technique.

Arepalli, Sivaram↗

NASA NTRS1989

Demonstration of the feasibility of laser induced fluorescence for arc jet flow diagnostics

Laser Induced Fluorescence (LIF) studies are carried out on nitric oxide and oxygen molecules in the arc jet flows at the NASA Johnson Space Center Reentry Testing Facility. Measurements are taken in the free stream and from a blunt body shock layer. Tests are performed under different flow conditions to determine the feasibility and sensitivity of the LIF technique for various species. This is developed as a part of high enthalpy flow diagnostics and will be useful to elucidate the rotational and vibrational temperatures. Adequate sensitivity for the detection of O(2) and NO is demonstrated. Proposed improvements of the existing system are presented.

Arepalli, Sivaram↗

NASA NTRS1989

Nonequilibrium shock layer temperature profiles from arc jet radiation measurements

Shock layer temperature profiles are obtained through analysis of radiation from shock layers produced by a blunt body inserted in arc jet flow. Spectral measurements have been made in a nitrogen flow of 54.4 gm/s at an enthalpy of 8.72 MJ/kg. Vibrational temperatures for N2+ are obtained by matching spectral regions from arc jet spectra with spectra generated using the NEQAIR code. Temperature profiles obtained from the radiation layers show a vibrational temperature higher than the rotational temperature near the front of the shock and both temperatures decrease as the flow approaches the body. The spectral measurements are made and analysis completed for four distances, from the surface of the blunt body. The corresponding shock layer thickness is approximately 3.6 cm. Although the shock layer appears to be in thermal nonequilibrium, the measured rotational temperature approaches the single temperature results of viscous shock layer calculations at this test condition.

Blackwell, Harvel E.↗

NASA NTRS1989

Vibrational temperature from measurements of N2 and N2(+) shock layer radiation

Measurements of the vibrational temperature in a shock layer produced by a cylindrical blunt body in an arc jet nitrogen flow are made for both the neutral molecule and the molecular ion. Spectra were obtained at two locations in the shock layer produced by a 20-cm long cylindrical blunt body inserted in the arc jet conical flow. The technique used for determining the temperatures from the spectral radiation involves obtaining ratios of integrated intensities for certain spectral regions of the measured spectrum and making a comparison with computed ratios as a function of temperature for the same spectral regions. The technique is difficult to apply due to radiation overlapping bands from other species. However, using a trial and error procedure, the vibrational and rotational temperatures at the two locations are inferred. The results indicate that the shock layer is significantly out of thermal equilibrium.

Blackwell, Harvel E.↗