Engineering Papers⌕ Search

Engineering topics

Arakawa, Yasuhiko

Publications and source records attributed to Arakawa, Yasuhiko.

Semiconductor quantum dots: Technological progress and future challenges

In quantum-confined semiconductor nanostructures, electrons exhibit distinctive behavior compared with that in bulk solids. This enables the design of materials with tunable chemical, physical, electrical, and optical properties. Zero-dimensional semiconductor quantum dots (QDs) offer strong light absorption and bright narrowband emission across the visible and infrared wavelengths and have been engineered to exhibit optical gain and lasing. These properties are of interest for imaging, solar energy harvesting, displays, and communications. Here, we offer an overview of advances in the synthesis and understanding of QD nanomaterials, with a focus on colloidal QDs, and discuss their prospects in technologies such as displays and lighting, lasers, sensing, electronics, solar energy conversion, photocatalysis, and quantum information.

García de Arquer, F. Pelayo↗

Temperature dependence of mid-infrared intersubband absorption in AlGaN/GaN multiple quantum wells

The temperature dependence of the mid-infrared intersubband (ISB) absorption in non-polar (m-plane) and polar (c-plane) AlGaN/GaN quantum wells (QWs) is studied. The ISB absorption shifts to higher energy as the temperature is reduced from 300 K to below 10 K. Both m-plane and c-plane QWs show a small energy shift (1.6–2.6 meV) compared to AlGaAs/GaAs (3.5–5.2 meV) and AlSb/InAs (6.2 and 12 meV) QWs. Theoretical calculations considering the temperature induced material constant changes show good agreement with the experimental results. These results suggest that ISB transition energies in AlGaN/GaN QWs are more stable against temperature change mainly because of the heavy effective masses and small nonparabolicities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Doping dependent blue shift and linewidth broadening of intersubband absorption in non-polar m-plane AlGaN/GaN multiple quantum wells

Blue shift and broadening of the absorption spectra of mid-infrared intersubband transition in non-polar m-plane AlGaN/GaN 10 quantum wells were observed with increasing doping density. As the doping density was increased from 6.6 × 10{sup 11} to 6.0 × 10{sup 12 }cm{sup −2} per a quantum well, the intersubband absorption peak energy shifted from 274.0 meV to 302.9 meV, and the full width at half maximum increased from 56.4 meV to 112.4 meV. Theoretical calculations reveal that the blue shift is due to many body effects, and the intersubband linewidth in doped AlGaN/GaN QW is mainly determined by scattering due to interface roughness, LO phonons, and ionized impurities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radial InP/InAsP/InP heterostructure nanowires on patterned Si substrates using self-catalyzed growth for vertical-type optical devices

Radial InP/InAsP/InP heterostructure nanowires (NWs) on SiO{sub 2}-mask-pattered Si substrates were reported using self-catalyzed InP NWs. Self-catalyzed growth was performed using low growth temperatures and high group-III flow rates, and vertical InP NWs were formed on the mask openings. The diameter and tapering of the self-catalyzed InP NWs were controlled by the introduction of HCl and H{sub 2}S gases during the NW growth, and InP NWs that have a straight region with decreased diameter were formed. Radial InP/InAsP/InP quantum wells (QWs) were grown on the sidewall of the vertical InP NWs on Si substrates. Room-temperature photoluminescence of single NWs from the QW was clearly observed, which exhibited the potential of building blocks for vertical-type optical devices on Si substrates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Observation of mid-infrared intersubband absorption in non-polar m-plane AlGaN/GaN multiple quantum wells

Mid-infrared (4.20–4.84 μm) intersubband absorption in non-polar m-plane Al{sub 0.5}Ga{sub 0.5}N/GaN multiple-quantum wells is observed at room temperature. 10 period Al{sub 0.5}Ga{sub 0.5}N/GaN multiple-quantum wells were grown on free-standing m-plane GaN substrates by metalorganic chemical vapor deposition (MOCVD), and the high-quality structural and optical properties are revealed by x-ray diffraction and photoluminescence studies. Through this we have demonstrated that MOCVD grown non-polar m-plane AlGaN/GaN quantum wells are a promising material for mid-infrared intersubband devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Single-photon emission from cubic GaN quantum dots

We report the demonstration of single-photon emission from cubic GaN/AlN quantum dots grown by molecular beam epitaxy. We have observed spectrally clean and isolated emission peaks from these quantum dots. Clear single-photon emission was detected by analyzing one such peak at 4 K. The estimated g{sup (2)}[0] value is 0.25, which becomes 0.05 when corrected for background and detector dark counts. We have also observed the single-photon nature of the emission up to 100 K (g{sup (2)}[0] = 0.47). These results indicate that cubic GaN quantum dots are possible candidates for high-temperature operating UV single-photon sources with the possibility of integration into photonic nanostructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-frequency summing in quantum dot photonic crystal nanocavity lasers

We demonstrate self-frequency summing in photonic crystal nanocavity lasers with quantum dot gain. Two dipole modes and a hexapole mode, supported in the cavity, simultaneously showed lasing oscillation in the near infrared wavelength region under optical carrier injection. Meanwhile, within the same laser cavity, the internally generated three laser fields are up-converted to exhibit sharp visible emission lines via intra-cavity nonlinear frequency summing (and doubling) processes. This self-frequency summing process in active nanocavities will pave the way for developing nanoscale nonlinear optical light sources.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication and optical properties of non-polar III-nitride air-gap distributed Bragg reflector microcavities

Using the thermal decomposition technique, non-polar III-nitride air-gap distributed Bragg reflector (DBR) microcavities (MCs) with a single quantum well have been fabricated. Atomic force microscopy reveals a locally smooth DBR surface, and room-temperature micro-photoluminescence measurements show cavity modes. There are two modes per cavity due to optical birefringence in the non-polar MCs, and a systematic cavity mode shift with cavity thickness was also observed. Although the structures consist of only 3 periods (top) and 4 periods (bottom), a quality factor of 1600 (very close to the theoretical value of 2100) reveals the high quality of the air-gap DBR MCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laterally self-ordered silicon-germanium islands with optimized confinement properties

We present an analysis of the electronic confinement properties of self-assembled islands forming via silicon and germanium co-deposition in molecular beam epitaxy. This approach allows the fabrication of laterally self-ordered three dimensional islands in the Stranski-Krastanow growth mode. Using a systematic structural analysis, we derive a realistic fit-parameter free island model for band structure simulations. A comparison between these band structure simulations and photoluminescence spectroscopy shows that such islands have a significant three dimensional spatial electron-hole wave function overlap. In addition, we show that this spatial wave function overlap overcompensates a weak wave function spreading in k-space.

36 MATERIALS SCIENCE↗