Instrumentation for Exploring Mars with High Science Return Small Payload Missions
No abstract provided
Anderson, Robert↗
Engineering topics
Anderson, Robert
Publications and source records attributed to Anderson, Robert.
Distributed Instruments for Planetary Surface Science
We present the case for distributed instruments by listing some critical planetary science questions that can be answered by deploying distributed instruments on planetary surfaces.
Rossi, Federico↗
Self-Reliant Rover Design for Increasing Mission Productivity
Achieving consistently high levels of productivity has been a challenge for Mars surface missions. While the rovers have made major discoveries and dramatically increased our understanding of Mars, they often require a great deal of effort from the operations teams, and achieving mission objectives can take longer than anticipated. The objective of this work is to identify changes to flight software and ground operations that enable high levels of productivity with reduced reliance on ground interactions. This will enable the development of Self-Reliant Rovers: rovers that make use of high-level guidance from operators to select their own situational activities and respond to unexpected conditions, all without dependence on ground intervention. In this paper we describe the system we are developing and illustrate how it enables increased mission productivity.
Vasavada, Ashwin↗
Self-Reliant Rover Design for Increasing Mission Productivity
Achieving consistently high levels of productivity has been a challenge for Mars surface missions. While the rovers have made major discoveries and dramatically increased our understanding of Mars, they often require a great deal of effort from the operations teams, and achieving mission objectives can take longer than anticipated. The objective of this work is to identify changes to flight software and ground operations that enable high levels of productivity with reduced reliance on ground interactions. This will enable the development of Self-Reliant Rovers: rovers that make use of high-level guidance from operators to select their own situational activities and respond to unexpected conditions, all without dependence on ground intervention. In this paper we describe the system we are developing and illustrate how it enables increased mission productivity.
Vasavada, Ashwin↗
Visible Derivative Spectroscopy of Multispectral and Hyperspectral Images: A New Approach to Algal and Cyanobacterial Differentiation
No abstract available
Ortiz, Joseph↗
Scientist-Guided Autonomy for Self-Reliant Rovers
Although Mars rover missions have been highly successful in accomplishing scientific objectives, mission productivity is limited by challenges stemming from the need for commanding ground-based targeted observations under communication constraints imposed by the large distance between Earth and Mars. With an aging fleet of sun-synchronous relay orbiters, the opportunities for regular communication with rovers may become even more limited. In addition to on-board planning, robust navigation, and health assessment, there are strategies to make future rovers more self-reliant by enabling them to perform autonomous scientific characterizations of new areas during periods without an opportunity for ground-based targeted observations. In particular, we have studied how a ”walkabout” strategy, in which an initial high-level characterization of a region is used to informed subsequent passes with specific targeted observations, was used successfully during the investigation of Pahrump Hills by the Mars Science Laboratory. Inspired by this approach, we have identified several capabilities that could allow a rover to autonomously perform some of these initial high-level characterization steps. In this paper, we describe technologies for identifying specific geologic units, regions, or features of interest, identifying areas of contact between two adjacent units, detecting and determining the orientation of layering within rock units, identifying novel and interesting features, and planning observations of regions with different sampling strategies using remote sensing instruments. The observations acquired with these approaches are driven by scientists’ guidance and can provide scientists with data to help inform their decisions about where to make more resource-intensive targeted observations.
Doran, Gary↗
Expressing Campaign Intent to Increase Productivity of Planetary Exploration Rovers
Achieving consistently high levels of productivity has been a challenge for Mars surface missions. While the rovers have made major discoveries and dramatically increased our understanding of Mars, they often require a great deal of effort from the operations teams and achieving mission objectives can take longer than anticipated. Missions have begun investigating ways to enhance productivity by increasing the amount of decision-making performed onboard the rovers. Our work focuses on the use of goal-based commanding as a means of more productively operating rovers. In particular, we are working on ways to convey the intent that operations team use to conduct science campaigns to the rover so that it can guide the rover in creating high quality plans and in identifying its own goals based on operator guidance. In addition to informing future surface exploration missions, this work is relevant for a wide range of applications in which operators must interact with limited communication opportunities.
Gaines, Daniel↗
Expressing campaign intent to increase productivity of planetary exploration rovers
UNKNOWN
Anderson, Robert↗
A Case Study of Productivity Challenges in Mars Science Laboratory Operations
Achieving consistently high levels of productivity has been a challenge for Mars surface missions. While the rovers have made major discoveries and dramatically increased our understanding of Mars, they often require a great deal of effort from the operations teams and achieving mission objectives can take longer than anticipated. We conducted an in-depth case study of Mars Science Laboratory operations in order to identify the productivity challenges facing surface missions. In this paper, we describe how we performed the case study and analyzed the data. We present and discuss the significant productivity challenges we identified during the study. In addition to informing future surface exploration missions, the study is relevant for a wide range of applications in which operators must interact with a robotic system with limited communication opportunities.
Gaines, Daniel↗
Airborne Hyperspectral Sensing of Monitoring Harmful Algal Blooms in the Great Lakes Region: System Calibration and Validation
Harmful algal blooms (HABs) in Lake Erie have been prominent in recent years. The bloom in 2014 reached a severe level causing the State of Ohio to declare a state of emergency. At that time NASA Glenn Research Center was requested by stakeholders to help monitor the blooms in Lake Erie. Glenn conducted flights twice a week in August and September and assembled and distributed the HAB information to the shoreline water resource managers using its hyperspectral imaging sensor (in development since 2006), the S3 Viking aircraft, and funding resources from the NASA Headquarters Earth Science Division. Since then, the State of Ohio, National Oceanic and Atmospheric Administration (NOAA), and U.S. Environmental Protection Agency (EPA) have elevated their funding and activities for observing, monitoring, and addressing the root cause of HABs. Also, the communities and stakeholders have persistently requested NASA Glenns participation in HAB observation. Abundant field campaigns and sample analyses have been funded by Ohio and NOAA, which provided a great opportunity for NASA to advance science and airborne hyperspectral remote sensing economically. Capitalizing on this opportunity to advance the science of algal blooms and remote sensing, NASA Glenn conducted the Airborne Hyperspectral Observation of harmful algal blooms campaign in 2015 that was, in many respects, twice as large as the 2014 campaign. Focusing mostly on Lake Erie, but also including other small inland lakes and the Ohio River, the campaign was conducted in partnership with a large number of partners specializing in marine science and remote sensing. Airborne hyperspectral observation of HABs holds promise to distinguish potential HABs from nuisance blooms, determine their concentrations, and delineate their movement in an augmented spatial and temporal resolution and under cloudsall of which are excellent complements to satellite observations. Working with collaborators at several Ohio and Michigan institutions as well as one in South Dakota and one in Alabama, this effort was able to provide next-day georeferenced estimates of cyanobacteria and scum concentrations. Very prompt processing and analysis of the hyperspectral imagery is necessary for the information to be acted upon. For example, a next-day report of an overflight over the Ohio River indicated that a bloom could be present as far downstream as the Cincinnati intake, but the Ohio EPA had not received visual reports of a bloom that far downstream. Water samples were obtained at the Cincinnati water intake, based on the flight data, and detected microcystins in the source water. The flight data helped State and municipal authorities realize the potential extent of that bloom, and triggered response sampling, before the visual river-wide scums started forming. The present document describes the process that was utilized to take raw remote sensing data and create information products; this includes system calibration and validation, efforts to correct atmospheric effects, and algorithms that produce the data products. Furthermore, successful research into improved algorithms for expanding the capability to delineate in water constituents is included. Finally, comparisons that show expected relationships between ground-based measurements and hyperspectral imager version 2 (HSI2) data results are presented, giving confidence in the remote sensing products.
Hyperspectral Imaging↗
Airborne Hyperspectral Imaging Studies of Harmful Algal Blooms
Algae monitoring of the great lakes by NASA GRC researchers.
optics↗
Alternative Bio-Derived JP-8 Class Fuel and JP-8 Fuel: Flame Tube Combustor Test Results Compared using a GE TAPS Injector Configuration
This paper presents results from tests in a NASA Glenn Research Center (GRC) flame tube facility, where a bio-derived alternate fuel was compared with JP-8 for emissions and general combustion performance. A research version of General Electric Aviation (GE) TAPS injector was used for the tests. Results include 2D, planar laser-based imaging as well as basic flow visualization of the flame. Four conditions were selected that simulate various engine power conditions relevant to NASA Fundamental Aeronautics Supersonics and Environmentally Responsible Aviation Projects were tested.
optical diagnostics↗
Productivity Challenges for Mars Rover Operations
Achieving consistently high levels of productivity for surface exploration missions has been a challenge for Mars missions. While the rovers have made major discoveries and accomplished a large number of objectives, they often require a great deal of effort from the operations teams and achievingobjectives can take longer than anticipated. This paper describes the early stages of a multi-year project to investigate solutions for enhancing surface mission productivity. A primary focus of this early stage is to conduct in-depth studies of Mars Science Laboratory science campaigns to gain a deeper understanding of the factors that impact productivity, and to use this understanding to identify potential changes to flight software and ground operations practices to increase productivity. We present the science campaigns we have selected along with a conceptual model of how surface missions achieve objectives that is used to guide the study. We also provide some early thoughts on the technologies, and their interactions, which we believe will play an important role in addressing surface mission productivity challenges.We are in the early stages of a multi-year project to studyand address productivity challenges of future surface missions. We have identified campaigns from the MSL missionfor study which we believe will yield valuable informationabout the nature of surface mission productivity challenges.Based on preliminary analysis from the data collected weanticipate that the lessons from these case studies will helpdevelop and mature our concepts for changes to flight andground systems to address these challenges.While the focus of our work is on Mars rover missions, webelieve the concepts in the work will be applicable to a variety of in-situ explorers, including Venus, and Titan, as wellas orbital missions, such as the Europa orbiter. These missions will also benefit from the ability to adapt and respondto the latest state of the spacecraft and its environment.
Gaines, Daniel↗
MSL's Widgets: Adding Rebustness to Martian Sample Acquisition, Handling, and Processing
Mars Science Laboratory's (MSL) Sample Acquisition Sample Processing and Handling (SA-SPaH) system is one of the most ambitious terrain interaction and manipulation systems ever built and successfully used outside of planet earth. Mars has a ruthless environment that has surprised many who have tried to explore there. The robustness widget program was implemented by the MSL project to help ensure the SA-SPaH system would be robust enough to the surprises of this ruthless Martian environment. The robustness widget program was an effort of extreme schedule pressure and responsibility, but was accomplished with resounding success. This paper will focus on a behind the scenes look at MSL's robustness widgets: the particle fun zone, the wind guards, and the portioner pokers.
particle fun zone (PFZ)↗
Development of Hyperspectral Remote Sensing Capability For the Early Detection and Monitoring of Harmful Algal Blooms (HABs) in the Great Lakes
Hyperspectral imagers have significant capability for detecting and classifying waterborne constituents. One particularly appropriate application of such instruments in the Great Lakes is to detect and monitor the development of potentially Harmful Algal Blooms (HABs). Two generations of small hyperspectral imagers have been built and tested for aircraft based monitoring of harmful algal blooms. In this paper a discussion of the two instruments as well as field studies conducted using these instruments will be presented. During the second field study, in situ reflectance data was obtained from the Research Vessel Lake Guardian in conjunction with reflectance data obtained with the hyperspectral imager from overflights of the same locations. A comparison of these two data sets shows that the airborne hyperspectral imager closely matches measurements obtained from instruments on the lake surface and thus positively supports its utilization for detecting and monitoring HABs.
Lekki, John↗
Data from the Mars Science Laboratory CheMin XRD/XRF Instrument
The CheMin instrument on the Mars Science Laboratory (MSL) rover Curiosity uses a Co tube source and a CCD detector to acquire mineralogy from diffracted primary X-rays and chemical information from fluoresced X-rays. CheMin has been operating at the MSL Gale Crater field site since August 5, 2012 and has provided the first X-ray diffraction (XRD) analyses in situ on a body beyond Earth. Data from the first sample collected, the Rocknest eolian soil, identify a basaltic mineral suite, predominantly plagioclase (approx.An50), forsteritic olivine (approx.Fo58), augite and pigeonite, consistent with expectation that detrital grains on Mars would reflect widespread basaltic sources. Minor phases (each <2 wt% of the crystalline component) include sanidine, magnetite, quartz, anhydrite, hematite and ilmenite. Significantly, about a third of the sample is amorphous or poorly ordered in XRD. This amorphous component is attested to by a broad rise in background centered at approx.27deg 2(theta) (Co K(alpha)) and may include volcanic glass, impact glass, and poorly crystalline phases including iron oxyhydroxides; a rise at lower 2(theta) may indicate allophane or hisingerite. Constraints from phase chemistry of the crystalline components, compared with a Rocknest bulk composition from the APXS instrument on Curiosity, indicate that in sum the amorphous or poorly crystalline components are relatively Si, Al, Mg-poor and enriched in Ti, Cr, Fe, K, P, S, and Cl. All of the identified crystalline phases are volatile-free; H2O, SO2 and CO2 volatile releases from a split of this sample analyzed by the SAM instrument on Curiosity are associated with the amorphous or poorly ordered materials. The Rocknest eolian soil may be a mixture of local detritus, mostly crystalline, with a regional or global set of dominantly amorphous or poorly ordered components. The Rocknest sample was targeted by MSL for "first time analysis" to demonstrate that a loose deposit could be scooped, sieved to <150 microns, and delivered to instruments in the body of the rover. A drilled sample of sediment in outcrop is anticipated. At the time of writing this abstract, promising outcrops are in range and this talk will provide an update on data collected with the CheMin instrument.
Vaniman, David↗