Engineering Papers⌕ Search

Engineering topics

Anderson, J. L. B.

Publications and source records attributed to Anderson, J. L. B..

14 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Experimental Impacts into Strength-Layered Targets: Crater Morphology and Morphometry

Impact cratering is a fundamental physical process that has dominated the evolution and modification of nearly every planetary surface in the Solar System. Impact craters serve as a means to probe the subsurface structure of a planetary body and provide hints about target surface properties. By examining small craters on the lunar maria and comparing these to experimental impacts in the laboratory, Oberbeck and Quaide first suggested that crater morphology can be used to estimate the thickness of a regolith layer on top of a more competent unit. Lunar craters show a morphological progression from a simple bowl shape to flat-floored and concentric craters as crater diameter increases for a given regolith thickness. This quantitative relationship is commonly used to estimate regolith thicknesses on the lunar surface and has also been explored via numerical and experimental studies. Here we report on a series of experimental impact craters formed in targets com-posed of a thin layer of loose sand on top of a stronger substrate at the Experimental Impact Laboratory at NASA Johnson Space Center.

Anderson, J. L. B.↗
NASA NTRS2020

Experimental Impacts into Strength-Layered Targets: Ejecta Kinematics

AImpact cratering has dominated the evolution and modification of planetary surfaces through-out the history of the solar system. Impact craters can serve as probes to understanding the details of a planetary subsurface; for example, Oberbeck and Quaide, suggested that crater morphology can be used to estimate the thickness of a regolith layer on top of a more competent unit. Lunar craters show a morphological progression from a simple bowl shape to flat-floored and concentric craters as crater diameter in-creases for a given regolith thickness. The final shape of the impact crater is a result of the subsurface flow-field initiated as the projectile transfers its energy and momentum to the target surface at the moment of impact. Therefore, when a regolith layer is present over a stronger substrate, such as is the case on the lunar surface, the substrate modifies the flow-field and thereby the excavation flow of the crater, which is reflected in the morphology of the final crater. Here we report on a series of experimental impacts into targets composed of a thin layer of loose sand on top of a stronger substrate. We use the Ejection-Velocity Measurement System developed to examine the ejecta kinematics during the formation of these craters.

Anderson, J. L. B.↗
NASA NTRS2019

Easing into Reality: Experimental Impacts into Slopes and Layers

Impact cratering is the dominant geo-logic process affecting the surfaces of solid bodies throughout our solar system. Because large impacts are (luckily) rare on Earth, the process is studied through experiments, observations of existing structures, numerical modeling, and theory, most of which make the simplifying assumptions that the target is homogeneous, with no substantial topography. Craters do not always form on level targets com-posed of homogeneous loose material. Rather (Fig. 1), they often form on sloped surfaces and in layered tar-gets, both of which significantly influence the excavation and ejecta deposition processes. Such craters are common on the Moon and asteroids. We are investigating crater formation in two separate suites of experiments using sloped and layered targets (Fig. 2) at the Experimental Impact Laboratory at NASA Johnson Space Center. An experiment was also performed in a flat, homogenous target to serve as a reference.

Ebel, J. M.↗
NASA NTRS2014

A Comparison of Crater-Size Scaling and Ejection-Speed Scaling During Experimental Impacts in Sand

Non‐dimensional scaling relationships are used to understand various cratering processes including final crater sizes and the excavation of material from a growing crater. The principal assumption behind these scaling relationships is that these processes depend on a combination of the projectile's characteristics, namely its diameter, density, and impact speed. This simplifies the impact event into a single point‐source. So long as the process of interest is beyond a few projectile radii from the impact point, the point‐source assumption holds. These assumptions can be tested through laboratory experiments in which the initial conditions of the impact are controlled and resulting processes measured directly. In this contribution, we continue our exploration of the congruence between crater‐size scaling and ejection‐speed scaling relationships. In particular, we examine a series of experimental suites in which the projectile diameter and average grain size of the target are varied.

Anderson, J. L. B.↗
NASA NTRS2010

Target and Projectile: Material Effects on Crater Excavation and Growth

Scaling relationships allow the initial conditions of an impact to be related to the excavation flow and final crater size and have proven useful in understanding the various processes that lead to the formation of a planetary-scale crater. In addition, they can be examined and tested through laboratory experiments in which the initial conditions of the impact are known and ejecta kinematics and final crater morphometry are measured directly. Current scaling relationships are based on a point-source assumption and treat the target material as a continuous medium; however, in planetary-scale impacts, this may not always be the case. Fragments buried in a megaregolith, for instance, could easily approach or exceed the dimensions of the impactor; rubble-pile asteroids could present similar, if not greater, structural complexity. Experiments allow exploration into the effects of target material properties and projectile deformation style on crater excavation and dimensions. This contribution examines two of these properties: (1) the deformation style of the projectile, ductile (aluminum) or brittle (soda-lime glass) and (2) the grain size of the target material, 0.5-1 mm vs. 1-3 mm sand.

Anderson, J. L. B.↗
NASA NTRS2004

Migration of the Cratering Flow-Field Center with Implications for Scaling Oblique Impacts

Crater-scaling relationships are used to predict many cratering phenomena such as final crater diameter and ejection speeds. Such nondimensional relationships are commonly determined from experimental impact and explosion data. Almost without exception, these crater-scaling relationships have used data from vertical impacts (90 deg. to the horizontal). The majority of impact craters, however, form by impacts at angles near 45 deg. to the horizontal. While even low impact angles result in relatively circular craters in sand targets, the effects of impact angle have been shown to extend well into the excavation stage of crater growth. Thus, the scaling of oblique impacts needs to be investigated more thoroughly in order to quantify fully how impact angle affects ejection speed and angle. In this study, ejection parameters from vertical (90 deg.) and 30 deg. oblique impacts are measured using three-dimensional particle image velocimetry (3D PIV) at the NASA Ames Vertical Gun Range (AVGR). The primary goal is to determine the horizontal migration of the cratering flow-field center (FFC). The location of the FFC at the time of ejection controls the scaling of oblique impacts. For vertical impacts the FFC coincides with the impact point (IP) and the crater center (CC). Oblique impacts reflect a more complex, horizontally migrating flow-field. A single, stationary point-source model cannot be used accurately to describe the evolution of the ejection angles from oblique impacts. The ejection speeds for oblique impacts also do not follow standard scaling relationships. The migration of the FFC needs to be understood and incorporated into any revised scaling relationships.

Anderson, J. L. B.↗
NASA NTRS2003

The Evolution of Oblique Impact Flow Fields Using Maxwell's Z Model

Oblique impacts are the norm rather than the exception for impact craters on planetary surfaces. This work focuses on the excavation of experimental oblique impact craters using the NASA Ames Vertical Gun Range (AVGR). Three-dimensional particle image velocimetry (3D PIV) is used to obtain quantitative data on ejection positions, three dimensional velocities and angles. These data are then used to constrain Maxwell's Z Model and follow the subsurface evolution of the excavation-stage flow-field center during oblique impacts.

Anderson, J. L. B.↗
NASA NTRS2003

The Evolution of Oblique Impact Flow Fields Using Maxwell's Z Model

Oblique impacts are the norm rather than the exception for impact craters on planetary surfaces. This work focuses on the excavation of experimental oblique impact craters using the NASA Ames Vertical Gun Range (AVGR). Three-dimensional particle image velocimetry (3D PIV) is used to obtain quantitative data on ejection positions, three-dimensional velocities and angles. These data are then used to test the applicability and limitations of Maxwell's Z Model in representing the subsurface evolution of the excavation-stage flow-field center during vertical and oblique impacts.

Anderson, J. L. B.↗
NASA NTRS2003

A Test of Maxwell's Z Model Using Inverse Modeling

In modeling impact craters a small region of energy and momentum deposition, commonly called a "point source", is often assumed. This assumption implies that an impact is the same as an explosion at some depth below the surface. Maxwell's Z Model, an empirical point-source model derived from explosion cratering, has previously been compared with numerical impact craters with vertical incidence angles, leading to two main inferences. First, the flowfield center of the Z Model must be placed below the target surface in order to replicate numerical impact craters. Second, for vertical impacts, the flow-field center cannot be stationary if the value of Z is held constant; rather, the flow-field center migrates downward as the crater grows. The work presented here evaluates the utility of the Z Model for reproducing both vertical and oblique experimental impact data obtained at the NASA Ames Vertical Gun Range (AVGR). Specifically, ejection angle data obtained through Three-Dimensional Particle Image Velocimetry (3D PIV) are used to constrain the parameters of Maxwell's Z Model, including the value of Z and the depth and position of the flow-field center via inverse modeling.

Anderson, J. L. B.↗
NASA NTRS2002

Evolving Flow-Field Centers in Oblique Impacts

Ejection velocities and angles for vertical impacts are compared to different regions of 30 degree impact curtains using 3D PIV. Ejecta dynamics of the different regions require flow-field centers that change through space and time. Additional information is contained in the original extended abstract.

Anderson, J. L. B.↗
NASA NTRS2002

Impact Crater Size and Evolution: Expectations for Deep Impact

Deep Impact will involve a unique cratering experiment designed to probe below the surface of a comet. Laboratory experiments provide critical data for crater scaling and evolution of the ejecta curtain. Additional information is contained in the original extended abstract.

Schultz, P. H.↗
NASA NTRS2001

Oblique Impact Ejecta Flow Fields: An Application of Maxwells Z Model

Oblique impact flow fields show an evolution from asymmetric to symmetric ejecta flow. This evolution can be put into the simple analytical description of the evolving flow field origin using the Maxwell Z Model. Additional information is contained in the original extended abstract.

Anderson, J. L. B.↗
NASA NTRS2000

Using 3-D PIV in Laboratory Impact Experiments

Three Dimensional Particle Imaging Velocimetry (3D PIV) tested at the NASA AVGR provides a revolutionary new strategy for exploring impact phenomena in laboratory experiments.

Schultz, P. H.↗