Engineering topics

Anderson, B. H.

Publications and source records attributed to Anderson, B. H..

At least 37 records · Page 2

NASA NTRS1980

Numerical simulation of supersonic inlets using a three-dimensional viscous flow analysis

A three-dimensional fully viscous computer analysis, which retains the viscous nature of the Navier-Stokes equations, was evaluated to determine its usefulness in the design of supersonic inlets. This procedure takes advantage of physical approximations to limit the high computer time and storage associated with complete Navier-Stokes solutions. Computed results are presented for a Mach 3.0 supersonic inlet with bleed and a Mach 7.4 hypersonic inlet. Good agreement was obtained between theory and data for both inlets. Results of a mesh sensitivity study are also shown.

Anderson, B. H.↗

NASA NTRS1979

Computational fluid mechanics of internal flow

Major solution techniques for internal computational fluid mechanics are discussed and some examples are presented. The major steps involved in developing a large computer code are then discussed.

Bowditch, D. N.↗

NASA NTRS1977

Interactive calculation procedure for supersonic flows

An interactive procedure was developed for supersonic viscous flows that can be used for either two-dimensional or axisymmetric configurations. The procedure is directed to supersonic internal flows as well as those supersonic external flows that require consideration of mutual interaction between the outer flow and the boundary layer flow. The flow field is divided into two regions: an inner region which is highly viscous and mostly subsonic and an outer region where the flow is supersonic and in which viscous effects are small but not negligible. For the outer region a numerical solution is obtained by applying the method of characteristics to a system of equations which includes viscous and conduction transport terms only normal to the streamlines. The inner region is treated by a system of equations of the boundary layer type that includes higher order effects such as longitudinal and transverse curvature and normal pressure gradients. These equations are coupled and solved simultaneously in the physical coordinates by using an implicit finite difference scheme. This system can also be used to calculate laminar and turbulent boundary layers using a scalar eddy viscosity concept.

Tassa, Y.↗

NASA NTRS1976

Characteristics procedure for supersonic flows including consideration of viscous contributions to flow rotationality

A characteristics procedure has been developed which includes viscous and conductive transport terms normal to streamlines. By introducing the transport terms as corrections, the equations retain their hyperbolic character. The solutions have been developed using an inverse grid scheme in a streamline-normal network. Inclusion of the transport terms enables tracing of shock waves through the supersonic portion of the boundary layer so that shock reflections are well-located. Excellent agreement is obtained with the results of other characteristics procedures and with the experimental pressure distributions for the waisted body of Winter, Smith and Rotta.

Anderson, B. H.↗

NASA NTRS1976

Finite difference procedure for boundary layers including effects of longitudinal and transverse curvatures

A second order viscous layer solution procedure has been developed that does in a consistent way include curvature effects and the corresponding normal pressure gradients. In the present system, the normal momentum equation is retained. The parabolic system of nonlinear partial differential equations is converted by linear finite differencing procedures to a system of linear algebraic equations and solved in primitive coordinates. The solutions have been shown to give smooth stable distributions for all the variables, most particularly the normal velocity which plays an important role in the interaction procedure. An algorithm for matching the viscous layer solution with a rotational characteristics outer solution has been developed.

Tassa, Y.↗

NASA NTRS1976

REJECT

Computer program determines performance and flow field characteristics of supersonic ejector nozzle. It includes sonic line effects and interaction analysis for mixing process between primary and secondary flows of nozzle.

Anderson, B. H.↗

NASA NTRS1976

Improved interactive calculation procedure for supersonic flows

An interactive numerical procedure has been developed for supersonic viscous flows (either two-dimensional or axisymmetric configurations). The flow field is divided into two regions: (1) an inner region which is highly viscous and mostly subsonic, and (2) an outer region where the flow is supersonic and in which viscous effects are small, but not negligible. This paper presents a detailed description of: I. Outer Region - numerical solution obtained by applying the method of characteristics to a system of equations which includes viscous and conduction transport terms only normal to the streamlines; II. Inner Region - treated by a system of equations of the boundary-layer type that includes higher order effects, such as longitudinal and transverse curvature and normal pressure gradients (equations are coupled and solved simultaneously in physical coordinates, using an implicit finite-difference scheme); III. Interactive Procedure - in the interaction mode, the two regions are coupled iteratively along a matching line, where the Mach number is of the order of 1.2.

Tassa, Y.↗

NASA NTRS1975

Numerical calculation of transonic boattail flow

A viscid-inviscid interaction procedure for the calculation of subsonic and transonic flow over a boattail was developed. This method couples a finite-difference inviscid analysis with an integral boundary-layer technique. Results indicate that the effect of the boundary layer is as important as an accurate inviscid method for this type of flow. Theoretical results from the solution of the full transonic-potential equation, including boundary layer effects, agree well with the experimental pressure distribution for a boattail. Use of the small disturbance transonic potential equation yielded results that did not agree well with the experimental results even when boundary-layer effects were included in the calculations.

Chow, W. L.↗

NASA NTRS1975

Strong interaction associated with transonic flow past boattailed afterbodies

The problem of transonic flow past boattails was studied with the aid of numerical relaxative schemes. Preliminary calculations were restricted to a particular model configuration which had been tested in an experimental program. It was found that the full potential equation must be considered in the study. The final results agreed very well with the experimental data. The investigation illustrates the strong interaction character of the transonic flow past a boattailed afterbody.

Chow, W. L.↗

NASA NTRS1974

Computer program for calculating the flow field of supersonic ejector nozzles

An analytical procedure for computing the performance of supersonic ejector nozzles is presented. This procedure includes real sonic line effects and an interaction analysis for the mixing process between the two streams. The procedure is programmed in FORTRAN 4 and has operated successfully on IBM 7094, IBM 360, CDC 6600, and Univac 1108.

Anderson, B. H.↗

NASA NTRS1974

Assessment of an analytical procedure for predicting supersonic ejector nozzle performance

The ability of analysis to predict ejector nozzle characteristics over a wide range of conditions and to study the relation between design parameters and performance is assessed. The analytical method investigated provided an accurate and economical method for predicting the performance of supersonic ejector nozzles. The factors which had the greatest influence over ejector nozzle behavior were those which influenced the initial expansion and recompression process.

Anderson, B. H.↗

NASA NTRS1972

Factors which influence the analysis and design of ejector nozzles

A theoretical analysis of the viscous interaction between the primary and secondary streams of ejector nozzles was developed. The analysis accounts for real sonic line effects and the streamwise variation in stream mixing and boundary layer within the ejector. The aspects of the analysis are explained and illustrated by applying the theory to a variety of ejector configurations including cylindrical shroud, contoured flap and plug nozzles. Extensive comparisons are made between theory and data to show the importance of various analytical assumptions and such design variables as diameter ratio, spacing ratio, total temperature ratio, and primary nozzle geometry.

Anderson, B. H.↗

NASA NTRS1972

Factors which influence the analysis and design of ejector nozzles.

A theoretical analysis of the viscous interaction between the primary and secondary streams of ejector nozzles was developed. The analysis accounts for real sonic-line effects and the streamwise variation in stream mixing and boundary layer within the ejector. The aspects of the analysis are explained and illustrated by applying the theory to a variety of ejector configurations including cylindrical shroud, contoured flap and plug nozzles. Extensive comparisons are made between theory and data to show the importance of various analytical assumptions and such design variables as diameter ratio, spacing ratio, total temperature ratio, and primary nozzle geometry.

Anderson, B. H.↗

NASA NTRS1971