Engineering topics

Almer, Jon

Publications and source records attributed to Almer, Jon.

3 records

DOE OSTI2020

The application of synchrotron micro-computed tomography to characterize the three-dimensional microstructure in irradiated nuclear fuel

This research demonstrated the first time that synchrotron X-ray micro-computed tomography (μ-CT) was utilized to analyze the three-dimensional (3-D) morphology of the microstructure of irradiated nuclear fuel. Both absorption contrast and propagation-based phase contrast enhanced μ-CT techniques were evaluated. Porosity and phase region volumes were determined in neutron irradiated uranium 10 wt.% zirconium (U-10Zr) using propagation-based phase contrast enhanced μ-CT. Volumes were determined by image processing software and algorithms, with the porosity volume subsequently compared to the ASTM E562 method. The 3-D porosity of a small region (~ 8 x 10 5 µm 3 ) located in the intermediate fuel redistribution zone that was removed via a focused ion beam was determined to be 7.2% via image processing. A detailed 3-D analysis of the porosity with respect to volume and morphology was provided. Five growth stages of pore evolution were observed including: nucleation, growth, coalescence, interconnected porosity, and extended/interconnected porosity. Four distinct phase regions were identified, including the pores, via both absorption contrast and propagation-based phase contrast enhanced μ-CT. A quantitative comparison of fuel swelling between this localized microscopic U-10Zr fuel region, previously irradiated in the Fast Flux Test Facility, and historic U-10Zr fuels irradiated in the Experimental Breeder Reactor-II (EBR-II) was conducted. It was determined that for similar burnups, the localized swelling in this microscopic fuel region was 7.7%, which was approximately one-half of the value of the macroscopic swelling reported in EBR-II irradiated fuel. With the advent of new specimen preparation tools for irradiated materials, as well as advances in characterization techniques, researchers can now obtain previously inaccessible microstructural insight into irradiated fuels. This possibility naturally lends itself to improved fuel performance models for the nuclear community.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2019

In-situ observation of an unusual phase transformation pathway with Guinier-Preston zone-like precipitates in Zr-based bulk metallic glasses

The pathway of amorphous-to-crystalline phase transformation in Zr 52.5 Cu 17.9 Ni 14.6 Al 10 Ti 5 bulk metallic glasses was studied using a suite of in-situ techniques. Multi-scale structure evidence reveals a five-stage pathway, analogous to the non-equilibrium transformation process with Guinier-Preston zones during aging in precipitation-hardened alloys, by the following sequence upon isothermal annealing the alloy in the supercooled liquid region: polyamorphous phase transition, chemical phase separation, the formation of a poorly-ordered metastable phase, and the formation of a final crystalline product. The changeable incubation periods at different annealing temperatures, and the abrupt multi-scale structure changes, as well as a latent heat release in the calorimetric measurements, support the first-order nature of the phase transformation at early stages. The structure evolution in real-space indicates that the enhancement of cluster connectivity on the medium-range scale plays essential roles in the early stages of the phase transformation, while the interface-limited ordering dominates the later stages. The experimental results suggest the phase transformation pathway with "Guinier-Preston zone-like" precipitates accompanied by the kinematic development of core-shell structures of diffuse interfaces with order parameters gradients, enabling the step-by-step decrease of free energy of the alloy system during phase transformation, which might be a universal behavior for alloys with excellent glass-forming ability.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Engineering medium-range order and polyamorphism in a nanostructured amorphous alloy

Like crystalline materials, the properties of amorphous materials can be tailored by tuning the local atomic-to-nanoscale structural configurations. Polyamorphism is evident by the coexistence of kinetically stabilized amorphous structures with tailorable short-to-medium-range orders, providing a viable means to engineer the degree of local order and heterogeneity. Here, we report experimental evidence of the coexistence of liquid-like and solid-like amorphous phases in a Ni82P18 amorphous alloy with enhanced thermal stability and plasticity prepared by pulsed electrodeposition. The two amorphous phases, of comparable volume fraction of ~50% each, have similar short-range order but are distinguished by packing at the medium-range length scale (>6 Å). Upon heating, a structure crossover at ~450 K was observed, where the liquid-like structure transforms to the solid-like structure, as evidenced by the enthalpy release and an anomalous contraction of atomic structure over the medium-range length scale, due to the metastable nature of the liquid-like structure.

36 MATERIALS SCIENCE↗