Engineering Papers⌕ Search

Engineering topics

Alman, D E

Publications and source records attributed to Alman, D E.

First-principles studies on vacancy-modified interstitial diffusion mechanism of oxygen in nickel, associated with large-scale atomic simulation techniques

This paper is concerned with the prediction of oxygen diffusivities in fcc nickel from first-principles calculations and large-scale atomic simulations. Considering only the interstitial octahedral to tetrahedral to octahedral minimum energy pathway for oxygen diffusion in fcc lattice, greatly underestimates the migration barrier and overestimates the diffusivities by several orders of magnitude. The results indicate that vacancies in the Ni-lattice significantly impact the migration barrier of oxygen in nickel. Incorporation of the effect of vacancies results in predicted diffusivities consistent with available experimental data. First-principles calculations show that at high temperatures the vacancy concentration is comparable to the oxygen solubility, and there is a strong binding energy and a redistribution of charge density between the oxygen atom and vacancy. Consequently, there is a strong attraction between the oxygen and vacancy in the Ni lattice, which impacts diffusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metallic Membrane Materials Development for Hydrogen Production from Coal Derived Syngas

The goals of Office of Clean Coal are: (1) Improved energy security; (2) Reduced green house gas emissions; (3) High tech job creation; and (4) Reduced energy costs. The goals of the Hydrogen from Coal Program are: (1) Prove the feasibility of a 40% efficient, near zero emissions IGCC plant that uses membrane separation technology and other advanced technologies to reduce the cost of electricity by at least 35%; and (2) Develop H{sub 2} production and processing technologies that will contribute {approx}3% in improved efficiency and 12% reduction in cost of electricity.

01 COAL, LIGNITE, AND PEAT↗

Oxidation resistance of novel ferritic stainless steels alloyed with titanium for SOFC interconnect applications

Chromia (Cr2O3) forming ferritic stainless steels are being developed for interconnect application in Solid Oxide Fuel Cells (SOFC). A problem with these alloys is that in the SOFC environment chrome in the surface oxide can evaporate and deposit on the electrochemically active sites within the fuel cell. This poisons and degrades the performance of the fuel cell. The development of steels that can form conductive outer protective oxide layers other than Cr2O3 or (CrMn)3O4 such as TiO2 may be attractive for SOFC application. This study was undertaken to assess the oxidation behavior of ferritic stainless steel containing 1 weight percent (wt.%) Ti, in an effort to develop alloys that form protective outer TiO2 scales. The effect of Cr content (6–22 wt.%) and the application of a Ce-based surface treatment on the oxidation behavior (at 800° C in air+3% H2O) of the alloys was investigated. The alloys themselves failed to form an outer TiO2 scale even though the large negative {delta}G of this compound favors its formation over other species. It was found that in conjunction with the Ce-surface treatment, a continuous outer TiO2 oxide layer could be formed on the alloys, and in fact the alloy with 12 wt.% Cr behaved in an identical manner as the alloy with 22 wt.% Cr.

30 DIRECT ENERGY CONVERSION↗

Materials Performance of Modified 430 Stainless Steel in Simulated SOFC Stack Environments for Integrated Gasification Fuel Cell System Applications

The corrosion behaviors of a low silicon and aluminum 430 stainless steel with and without ceria surface treatment were investigated in a simulated coal syngas at 800 {degree sign}C and in air. Thermodynamic calculations were made to predict carbon activities for the coal syngas as a function of temperature. At 800 {degree sign}C, carbon activity is ~1.1, which indicates that carbon that forms could diffuse into the steel and induce carbon corrosion, e.g. carburization and metal dusting. The surface morphology was investigated with X-ray diffraction and scanning electron microscopy. In coal gas, the scale formed on bare steel consisted of Mn1.5Cr1.5O4 and Cr2O3 and on ceria treated steel (Fe, Mn)O, FeCr2O4, Cr2O3, and CeCrO3. Both materials underwent carburization, but not metal dusting. The results of oxidation in air using a thermogravimetric apparatus confirmed that the 430 sample was less resistant to oxidation than the 430 treated with ceria.

30 DIRECT ENERGY CONVERSION↗

Steam turbine materials and corrosion

Ultra-supercritical (USC) power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energy’s Advanced Power Systems Initiatives include power generation from coal at 60% efficiency, which would require steam temperatures of up to 760°C. This project examines the steamside oxidation of candidate alloys for use in USC systems, with emphasis placed on applications in high- and intermediate-pressure turbines. As part of this research a concern has arisen about the possibility of high chromia evaporation rates of protective scales in the turbine. A model to calculate chromia evaporation rates is presented.

36 MATERIALS SCIENCE↗