Engineering topics

Allison, R. L.

Publications and source records attributed to Allison, R. L..

5 records

NASA NTRS1978

Application of winglets and/or wing tip extensions with active load control on the Boeing 747

The application of wing tip modifications and active control technology to the Boeing 747 airplane for the purpose of improving fuel efficiency is considered. Wing tip extensions, wing tip winglets, and the use of the outboard ailerons for active wing load alleviation are described. Modest performance improvements are indicated. A costs versus benefits approach is taken to decide which, if any, of the concepts warrant further development and flight test leading to possible incorporation into production airplanes.

Allison, R. L.↗

NASA NTRS1977

AEMS implementation cost study for Boeing 727

Costs for airline operational implementation of a NASA-developed approach energy management system (AEMS) concept, as applied to the 727 airplane, were determined. Estimated costs are provided for airplane retrofit and for installation of the required DME ground stations. Operational costs and fuel cost savings are presented in a cost-of-ownership study. The potential return on the equipment investment is evaluated using a net present value method. Scheduled 727 traffic and existing VASI, ILS, and collocated DME ground station facilities are summarized for domestic airports used by 727 operators.

Allison, R. L.↗

NASA NTRS1977

Application of NASA-ARC delayed flap approach procedures to Boeing 727 airplane

The results of an engineering and piloted simulator study to adapt a NASA developed-approach energy management system (AEMS) concept to the B727 are presented. The AEMS concept was developed and flight tested on a CV-990. The purpose of the AEMS is to reduce approach time, fuel, and noise by providing computer-driven cockpit displays to assist the pilot in flying optimized delayed flap approach (DFA) procedures. Development of the DFA flight profiles, the AEMS airborne digital computer algorithm, and associated cockpit displays were studied. Study ground rules and pertinent aerodynamic and noise trend data used in developing the flight profiles are presented. Approach time, fuel, and noise for the DFA are compared to several other types of procedures.

Allison, R. L.↗

NASA NTRS1974

Applicability of NASA (ARC) two-segment approach procedures to Boeing Aircraft

An engineering study to determine the feasibility of applying the NASA (ARC) two-segment approach procedures and avionics to the Boeing fleet of commercial jet transports is presented. This feasibility study is concerned with the speed/path control and systems compability aspects of the procedures. Path performance data are provided for representative Boeing 707/727/737/747 passenger models. Thrust margin requirements for speed/path control are analyzed for still air and shearing tailwind conditions. Certification of the two-segment equipment and possible effects on existing airplane certification are discussed. Operational restrictions on use of the procedures with current autothrottles and in icing or reported tailwind conditions are recommended. Using the NASA/UAL 727 procedures as a baseline, maximum upper glide slopes for representative 707/727/737/747 models are defined as a starting point for further study and/or flight evaluation programs.

Allison, R. L.↗

NASA NTRS1972

Design evaluation criteria for commercial STOL transports

Handling qualities criteria and operational performance margins have been determined for the landing phase of commercial short-takeoff-and-landing airplanes. The requirements are the result of a literature survey, analysis of areas found to be inadequately covered by current criteria, and a subsequent piloted simulator investigation of critical criteria requiring substantiation. Three complete simulator models were used, each describing the characteristics of a different high-lift system, the externally blown flap, the augmentor flap, and the internally blown flap. The proposed criteria are presented with substantiating discussions from currently available data or directly from the results of this simulation work where it is applicable.

Allison, R. L.↗