Engineering Papers⌕ Search

Engineering topics

Alfaraidi, Abdulrahman M.

Publications and source records attributed to Alfaraidi, Abdulrahman M..

Mild pH-decoupling aqueous flow battery with practical pH recovery

Establishing a pH difference between the two electrolytes (pH decoupling) of an aqueous redox flow battery (ARFB) enables cell voltages exceeding the 1.23 V thermodynamic water-splitting window, but acid–base crossover penalizes efficiency and lifetime. Here we employ mildly acidic and mildly alkaline electrolytes to mitigate crossover, achieving high round-trip energy efficiency with open circuit voltage >1.7 V. We implemented an acid–base regeneration system to periodically restore electrolytes to their initial pH values. The combined system exhibited capacity fade rate <0.07% per day, round-trip energy efficiency >85% and approximately 99% Coulombic efficiency during stable operation for over a week. Cost analysis shows that the tolerance of acid–base crossover could be increased if the pH-decoupling ARFB achieved a higher voltage output and lower resistance. Finally, this work demonstrates principles for improving lifespan, rate capability and energy efficiency in high-voltage pH-decoupling ARFBs and pH recovery concepts applicable for pH-decoupling systems.

25 ENERGY STORAGE↗

An Extremely Stable and Soluble NH 2 -Substituted Anthraquinone Electrolyte for Aqueous Redox Flow Batteries

Aqueous redox flow batteries require long-term stable redox molecules for electrical energy storage. Anthraquinones, especially ether bond-decorated ones, experience two dominant decomposition pathways, including side-chain loss and anthrone formation. Here, with the aid of DFT calculations, we designed an anthraquinone (3-NH 2 -2-2PEAQ) bearing an ether substituent and a neighboring NH 2 group, which suppresses both of these decomposition mechanisms and exhibits a high solubility of 1.1 M. When paired with ferrocyanide in a full cell, this anthraquinone, at a concentration of 1.0 M, can operate at greater than 1 V with an extremely low capacity fade rate of 0.01%/day and a Coulombic efficiency above 99.8% while cycling for over a month. The synergistic effects of the ether and parent amino substituents are extremely sensitive to the precise substitution pattern of the anthraquinone. This study demonstrates the effectiveness of the judicious use of DFT-based prediction in rapidly identifying promising candidate electrolytes from a large chemical space.

25 ENERGY STORAGE↗

Size and Charge Effects on Crossover of Flow Battery Reactants Evaluated by Quinone Permeabilities Through Nafion

Organic reactants are promising candidates for long-lifetime redox flow batteries, and synthetic chemistry unlocks a wide design space for new molecules. Minimizing crossover of these molecules through ion exchange membranes is one important design consideration, but the ways in which the crossover rate depends on the structure of the crossing species remain unclear. Here, we contribute a systematic evaluation of size- and charge-based effects on dilute-solution small molecule permeability through the Nafion NR212 cation exchange membrane. We found that increasing the magnitude of charge number z with the same sign as membrane fixed charges, achieved here by successive sulfonation of quinone redox cores, results in more than an order of magnitude permeability reduction per sulfonate. Size-based effects, understood by comparing the Stokes radii of the quinones studied, also reduces permeability with increasing effective molecule size, but doubling the effective size of the redox reactants resulted in a permeability decrease of less than a factor of three.

25 ENERGY STORAGE↗

An Extremely Stable, Highly Soluble Monosubstituted Anthraquinone for Aqueous Redox Flow Batteries

An extremely stable, energy-dense (53.6 Ah L –1 , 2 M transferrable electrons), low crossover (permeability of <1 × 10 –13 cm 2 s –1 using Nafion 212 (Nafion is a trademark polymer from DuPont)), and potentially inexpensive anthraquinone with 2-2-propionate ether anthraquinone structure (abbreviated 2-2PEAQ) is synthesized and extensively evaluated under practically relevant conditions for use in the negolyte of an aqueous redox flow battery. 2-2PEAQ shows a high stability with a fade rate of 0.03–0.05% per day at different applied current densities, cut-off voltage windows, and concentrations (0.1 and 1.0 M ) in both a full cell paired with a ferro/ferricyanide posolyte as well as a symmetric cell. 2-2PEAQ is further shown to have extreme long-term stability, losing only ≈0.01% per day when an electrochemical rejuvenation strategy is employed. From post-mortem analysis (nuclear magnetic resonance (NMR), liquid chromatography–mass spectrometry (LC-MS), and cyclic voltammetry (CV)) two degradation mechanisms are deduced: side chain loss and anthrone formation. 2-2PEAQ with the ether linkages attached on carbons non-adjacent to the central ring is found to have three times lower fade rate compared to its isomer with ether linkages on the carbon adjacent to the central quinone ring. Here, the present study introduces a viable negolyte candidate for grid-scale aqueous organic redox flow batteries.

25 ENERGY STORAGE↗