Engineering Papers⌕ Search

Engineering topics

Adam, W.

Publications and source records attributed to Adam, W..

664 records · Page 37

Measurement of Dijet Angular Distributions and Search for Quark Compositeness in pp Collisions at {radical}(s)=7 TeV

Dijet angular distributions are measured over a wide range of dijet invariant masses in pp collisions at {radical}(s)=7 TeV, at the CERN LHC. The event sample, recorded with the CMS detector, corresponds to an integrated luminosity of 36 pb{sup -1}. The data are found to be in good agreement with the predictions of perturbative QCD, and yield no evidence of quark compositeness. With a modified frequentist approach, a lower limit on the contact interaction scale for left-handed quarks of {Lambda}{sup +}=5.6 TeV ({Lambda}{sup -}=6.7 TeV) for destructive (constructive) interference is obtained at the 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dijet Azimuthal Decorrelations in pp Collisions at {radical}(s)=7 TeV

Measurements of dijet azimuthal decorrelations in pp collisions at {radical}(s)=7 TeV using the CMS detector at the CERN LHC are presented. The analysis is based on an inclusive dijet event sample corresponding to an integrated luminosity of 2.9 pb{sup -1}. The results are compared to predictions from perturbative QCD calculations and various Monte Carlo event generators. The dijet azimuthal distributions are found to be sensitive to initial-state gluon radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the B{sup +} Production Cross Section in pp Collisions at {radical}(s)=7 TeV

Measurements of the total and differential cross sections d{sigma}/dp{sub T}{sup B} and d{sigma}/dy{sup B} for B{sup +} mesons produced in pp collisions at {radical}(s)=7 TeV are presented. The data correspond to an integrated luminosity of 5.8 pb{sup -1} collected by the CMS experiment operating at the LHC. The exclusive decay B{sup +}{yields}J/{psi}K{sup +}, with J/{psi}{yields}{mu}{sup +}{mu}{sup -}, is used to detect B{sup +} mesons and to measure the production cross section as a function of p{sub T}{sup B} and y{sup B}. The total cross section for p{sub T}{sup B}>5 GeV and |y{sup B}|<2.4 is measured to be 28.1{+-}2.4{+-}2.0{+-}3.1 {mu}b, where the first uncertainty is statistical, the second is systematic, and the last is from the luminosity measurement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Early ship-based upper-air data and comparison with the Twentieth Century Reanalysis

Extension of 3-D atmospheric data products back into the past is desirable for a wide range of applications. Historical upper-air data are important in this endeavour, particularly in the maritime regions of the tropics and the southern hemisphere, where observations are extremely sparse. Here we present newly digitized and re-evaluated early ship-based upper-air data from two cruises: (1) kite and registering balloon profiles from onboard the ship SMS Planet on a cruise from Europe around South Africa and across the Indian Ocean to the western Pacific in 1906/1907, and (2) ship-based radiosonde data from onboard the MS Schwabenland on a cruise from Europe across the Atlantic to Antarctica and back in 1938/1939. We describe the data and provide estimations of the errors. We compare the data with a recent reanalysis (the Twentieth Century Reanalysis Project, 20CR, Compo et al., 2011) that provides global 3-D data back to the 19th century based on an assimilation of surface pressure data only (plus monthly mean sea-surface temperatures). In cruise (1), the agreement is generally good, but large temperature differences appear during a period with a strong inversion. In cruise (2), after a subset of the data are corrected, close agreement between observations and 20CR is found for geopotential height (GPH) and temperature notwithstanding a likely cold bias of 20CR at the tropopause level. Results are considerably worse for relative humidity, which was reportedly inaccurately measured. Note that comparing 20CR, which has limited skill in the tropical regions, with measurements from ships in remote regions made under sometimes difficult conditions can be considered a worst case assessment. In view of that fact, the anomaly correlations for temperature of 0.3–0.6 in the lower troposphere in cruise (1) and of 0.5–0.7 for tropospheric temperature and GPH in cruise (2) are considered as promising results. Moreover, they are consistent with the error estimations. The results suggest room for further improvement of data products in remote regions.

54 ENVIRONMENTAL SCIENCES↗

Measurement of the Isolated Prompt Photon Production Cross Section in pp Collisions at {radical}(s)=7 TeV

The differential cross section for the inclusive production of isolated prompt photons has been measured as a function of the photon transverse energy E{sub T}{sup {gamma}} in pp collisions at {radical}(s)=7 TeV using data recorded by the CMS detector at the LHC. The data sample corresponds to an integrated luminosity of 2.9 pb{sup -1}. Photons are required to have a pseudorapidity |{eta}{sup {gamma}}|<1.45 and E{sub T}{sup {gamma}}>21 GeV, covering the kinematic region 0.006<x{sub T}<0.086. The measured cross section is found to be in agreement with next-to-leading-order perturbative QCD calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Stopped Gluinos in pp Collisions at {radical}(s)=7 TeV

The results of the first search for long-lived gluinos produced in 7 TeV pp collisions at the CERN Large Hadron Collider are presented. The search looks for evidence of long-lived particles that stop in the CMS detector and decay in the quiescent periods between beam crossings. In a dataset with a peak instantaneous luminosity of 1x10{sup 32} cm{sup -2} s{sup -1}, an integrated luminosity of 10 pb{sup -1}, and a search interval corresponding to 62 hours of LHC operation, no significant excess above background was observed. Limits at the 95% confidence level on gluino pair production over 13 orders of magnitude of gluino lifetime are set. For a mass difference m{sub g}-tilde-m{sub -{chi}1}{sup 0}>100 GeV/c{sup 2}, and assuming BR(g-tilde{yields}g{chi}-tilde{sub 1}{sup 0})=100%, m{sub g}-tilde<370 GeV/c{sup 2} are excluded for lifetimes from 10 {mu}s to 1000 s.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of long-range, near-side angular correlations in proton-proton collisions at the LHC

Results on two-particle angular correlations for charged particles emitted in proton-proton collisions at center-of-mass energies of 0.9, 2.36, and 7 TeV are presented, using data collected with the CMS detector over a broad range of pseudorapidity (η) and azimuthal angle (Φ). Short-range correlations in Δη, which are studied in minimum bias events, are characterized using a simple “independent cluster” parametrization in order to quantify their strength (cluster size) and their extent in η (cluster decay width). Long-range azimuthal correlations are studied differentially as a function of charged particle multiplicity and particle transverse momentum using a 980 nb –1 data set at 7 TeV. In high multiplicity events, a pronounced structure emerges in the two-dimensional correlation function for particle pairs with intermediate p T of 1–3 GeV/c, 2.0 < |Δη| < 4.8 and ΔΦ ≈ 0. This is the first observation of such a long-range, near-side feature in two-particle correlation functions in $p\bar{p}$ or collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Alignment of the CMS Silicon Strip Tracker during stand-alone Commissioning

The results of the CMS tracker alignment analysis are presented using the data from cosmic tracks, optical survey information, and the laser alignment system at the Tracker Integration Facility at CERN. During several months of operation in the spring and summer of 2007, about five million cosmic track events were collected with a partially active CMS Tracker. This allowed us to perform first alignment of the active silicon modules with the cosmic tracks using three different statistical approaches/ validate the survey and laser alignment system performance/ and test the stability of Tracker structures under various stresses and temperatures ranging from +15C to -15C. Comparison with simulation shows that the achieved alignment precision in the barrel part of the tracker leads to residual distributions similar to those obtained with a random misalignment of 50 (80) microns in the outer (inner) part of the barrel.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Performance studies of the CMS Strip Tracker before installation

In March 2007 the assembly of the Silicon Strip Tracker was completed at the Tracker Integration Facility at CERN. Nearly 15% of the detector was instrumented using cables, fiber optics, power supplies, and electronics intended for the operation at the LHC. A local chiller was used to circulate the coolant for low temperature operation. In order to understand the efficiency and alignment of the strip tracker modules, a cosmic ray trigger was implemented. From March through July 4.5 million triggers were recorded. This period, referred to as the Sector Test, provided practical experience with the operation of the Tracker, especially safety, data acquisition, power, and cooling systems. This paper describes the performance of the strip system during the Sector Test, which consisted of five distinct periods defined by the coolant temperature. Significant emphasis is placed on comparisons between the data and results from Monte Carlo studies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The CMS experiment at the CERN LHC

The Compact Muon Solenoid (CMS) detector is described. The detector operates at the Large Hadron Collider (LHC) at CERN. It was conceived to study proton-proton (and lead-lead) collisions at a centre-of-mass energy of 14 TeV (5.5 TeV nucleon-nucleon) and at luminosities up to $10^{34} cm^{-2} s^{-1} (10^{27}cm^{-2} s^{-1})$. At the core of the CMS detector sits a high-magnetic-field and large-bore superconducting solenoid surrounding an all-silicon pixel and strip tracker, a lead-tungstate scintillating-crystals electromagnetic calorimeter, and a brass-scintillator sampling hadron calorimeter. The iron yoke of the flux-return is instrumented with four stations of muon detectors covering most of the $4\pi$ solid angle. Forward sampling calorimeters extend the pseudorapidity coverage to high values ($|\eta|$ <= 5) assuring very good hermeticity. The overall dimensions of the CMS detector are a length of 21.6 m, a diameter of 14.6 m and a total weight of 12500 t.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗