Engineering Papers⌕ Search

Engineering topics

Abshire, James B.

Publications and source records attributed to Abshire, James B..

85 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Multishot laser altimeter - Design and performance

The maximum measurement range of a laser altimeter can be extended by averaging the measurements from multiple laser shots at the same target. We present the principles of operation and design of such a multishot laser altimeter, which uses a Si avalanche photodiode detector. As an example, the performance of a spaceborne multishot altimeter containing components similar to those of the single-shot Mars Observer Laser Altimeter are given under operating conditions that would be encountered near Saturn. With 100-shot averages, we show that the multishot laser altimeter is capable of accurate ranging at fly-by distances of 10,000 km from an icy satellite. With 100-shot averages, the minimum optical signal level at a 90 percent correct-measurement probability under nighttime background is 9.8 detected signal photons per pulse as compared with 76 photons per pulse with a single shot.

Sun, Xiaoli↗
NASA NTRS1993

Airborne 2 color ranging experiment

Horizontal variations in the atmospheric refractivity are a limiting error source for many precise laser and radio space geodetic techniques. This experiment was designed to directly measure horizontal variations in atmospheric refractivity, for the first time, by using 2 color laser ranging measurements to an aircraft. The 2 color laser system at the Goddard Optical Research Facility (GORF) ranged to a cooperative laser target package on a T-39 aircraft. Circular patterns which extended from the southern edge of the Washington D.C. Beltway to the southern edge of Baltimore, MD were flown counter clockwise around Greenbelt, MD. Successful acquisition, tracking, and ranging for 21 circular paths were achieved on three flights in August 1992, resulting in over 20,000 two color ranging measurements.

Millar, Pamela S.↗
NASA NTRS1992

Altimetry and lidar using AlGaAs lasers modulated with pseudo-random codes

We have demonstrated a prototype laser altimeter and lidar which uses a low power AlGaAs laser modulated with a pseudorandom noise (PN) code, a 20 cm diameter telescope, and a photon counting receiver. Measurements to tree canopies over a 400 m horizontal path show strong signals with 5.3 mW average power and a 6.4 msec averaging time. Computer simulations predict lidar performance for various types of scattering performance.

Abshire, James B.↗
NASA NTRS1992

Receiver characteristics of laser altimeters with avalanche photodiodes

The receiver characteristics of a laser altimeter system containing an avalanche photodiode photodetector are analyzed using the Gaussian approximation, the saddle-point approximation, and a nearly exact analysis. The last two methods are shown to yield very similar results except when the background noise is extremely low and the probability of false alarm is high. However, the Gaussian approximation method is shown to cause significant errors even under relatively high levels of background noise and received signal energy.

Sun, Xiaoli↗
NASA NTRS1989

Phase-front measurements of an injection-locked AlGaAs laser-diode array

The phase-front quality of the primary spatial lobe emitted from an injection-locked gain-guided AlGaAs laser-diode array is measured by using an equal-path, phase-shifting Mach-Zehnder interferometer. Root-mean-square phase errors of 0.037 + or - 0.003 wave are measured for the single spatial lobe, which contained 240-mW cw output power in a single longitudinal mode. This phase-front quality corresponds to a Strehl ratio of S = 0.947, which results in a 0.23-dB power loss from the single lobe's ideal diffraction-limited power. These values are comparable with those measured for single-stripe index-guided AlGaAs lasers.

Cornwell, Donald M., Jr.↗
NASA NTRS1987

The Geoscience Laser Altimetry/Ranging System

The Geoscience Laser Altimetry/Ranging System (GLARS), a combined laser ranging and altimetry system capable of subcentimeter position determinations of retroflector targets and subdecimeter profiling of topography, is described. The system uses advanced but currently available state-of-the-art components. Laboratory, field, and numerical experiments have indicated the suitability of GLARS as an instrument for Eos and other space platforms.

Cohen, Steven C.↗
NASA NTRS1987

Time evolution of pulsed far-field patterns of GaAlAs phase-locked laser-diode arrays

The time evolution of pulsed far fields from commercially available gain-guided phase-locked arrays has been studied and compared to experimental results previously obtained by streak camera measurements, and to predictions of coupled-mode theories developed for index- and gain-guided arrays. Although phase locking is evident by 100 ps into the drive pulse, stable operation in a fixed superposition of array modes is not achieved until 1-2 ns after the drive pulse has stabilized.

Forrest, Kathrine A.↗
NASA NTRS1987

Estimating the arrival times of photon-limited laser pulses in the presence of shot and speckle noise

Maximum-likelihood (ML) receivers are frequently used to optimize the timing performance of laser-ranging and laser-altimetry systems in the presence of shot and speckle noise. Monte Carlo method was used to examine ML-receiver performance with return signals in the 10-5000-photoelectron (pe) range. The simulations were performed for shot noise only and for shot and speckle noise. The results agree with previous theory for signal strengths greater than about 100 pe's but show that the theory can significantly underestimate timing errors for weaker received signals. Sharp high-bandwidth features in the detected signals are shown to improve timing performance only if their signal levels are greater than 4-5 pe's.

Abshire, James B.↗
NASA NTRS1987

Experimental evaluation of the performance of pulsed two-color laser-ranging systems

Two-color laser-ranging systems can be used to estimate the atmospheric delay by measuring the difference in propagation times between two optical pulses transmitted at different wavelengths. This paper describes horizontal-path ranging experiments that were conducted using flat diffuse targets and cube-corner reflector arrays. Measurements of the timing accuracy of the cross-correlation estimator, atmospheric delay, received pulse shapes, and signal power spectra are presented. The results are in general agreement with theory and indicate that target speckle can be the dominant noise source when the target is small and is located far from the ranging system or when the target consists of a small number of cube-corner reflectors.

Im, Kwaifong E.↗
NASA NTRS1987

Two-color short-pulse laser altimeter measurements of ocean surface backscatter

The timing and correlation properties of pulsed laser backscatter from the ocean surface have been measured with a two-color short-pulse laser altimeter. The Nd:YAG laser transmitted 70- and 35-ps wide pulses simultaneously at 532 and 355 nm at nadir, and the time-resolved returns were recorded by a receiver with 800-ps response time. The time-resolved backscatter measured at both 330-m and 1291-m altitudes showed little pulse broadening due to the submeter laser spot size. The differential delay of the 355-nm and 532-nm backscattered waveforms were measured with a rms error of about 75 ps. The change in aircraft altitudes also permitted the change in atmospheric pressure to be estimated by using the two-color technique.

Abshire, James B.↗
NASA NTRS1987

Dual laser diode array emission coherently summed in an external cavity

The output power from two ten-element laser diodes arrays has been efficiently summed in an external cavity to obtain a coherent, continuous wave beam. In this technique, laser emission from each front surface antireflection coated diode array is stimulated by injection of emission from a second such array. This method was also applied to single-element diode lasers. The output beam characteristics such as spectral distribution, far-field and near-field beam patterns, and overall efficiency have been measured.

Hemmati, Hamid↗
NASA NTRS1987

Grating rhomb diode laser power combiner

A compact device for spectrally combining many laser-diode beams into a single multi-wavelength beam has been developed for use in NASA's intersatellite communications programs. The prototype device combines seven 30 milliwatt beams into a single beam with 70 percent efficiency producing an output of approximately 150 milliwatts. All beams are coaxial and can be collimated with a single transmitter optical system. The combining technique is relatively insensitive to drifts in the laser-diode wavelength and provides both increased power output and laser-diode source redundancy. Combination of more than 100 laser-diodes producing an output greater than 5 watts appears feasible with this technique.

Minott, Peter O.↗