Engineering Papers⌕ Search

Engineering topics

Abreu, N. P.

Publications and source records attributed to Abreu, N. P..

Measurement and Simulation of the RHIC Abort Kicker Longitudinal Impedance

In face of the new upgrades for RHIC the longitudinal impedance of the machine plays an important role in setting the threshold for instabilities and the efficacy of some systems. In this paper we describe the measurement of the longitudinal impedance of the abort kicker for RHIC as well as computer simulations of the structure. The impedance measurement was done by the S21 wire method covering the frequency range from 9 kHz to 2.5 GHz. We observed a sharp resonance peak around 10 MHz and a broader peak around 20 MHz in both, the real and imaginary part, of the Z/n. These two peaks account for a maximum imaginary longitudinal impedance of j15 Ω, a value an order of magnitude larger than the estimated value of j0.2 Ω, which indicates that the kicker is one of the main sources of longitudinal impedance in the machine. A computer model was constructed for simulations in the CST MWS program. Results for the magnet input and the also the beam impedance are compared to the measurements. A more detail study of the system properties and possible changes to reduce the coupling impedance are presented.

43 PARTICLE ACCELERATORS↗

Stochastic Boundary, Diffusion, Emittance Growth and Lifetime calculation for the RHIC e-lens

To compensate the large tune shift and tune spread generated by the head-on beam-beam interactions in polarized proton operation in the Relativistic Heavy Ion Collider (RHIC), a low energy electron beam with proper Gaussian transverse profiles was proposed to collide head-on with the proton beam. In this article, using a modified version of SixTrack, we investigate stability of the single particle in the presence of head-on beam-beam compensation. The Lyapunov exponent and action diffusion are calculated and compared between the cases without and with beam-beam com pensation for two different working points and various bunch intensities. Using the action diffusion results the emittance growth rate and lifetime of the proton beam is also estimated for the different scenarios.

43 PARTICLE ACCELERATORS↗

Measurement of HOMs in the RHIC RF Cavities

The Relativistic Heavy Ion Collider (RHIC) consists of two counter rotating beams which collide at two different experiments (PHENIX at IP8 and STAR at IP6). The particles that are accelerated range from protons to gold ions and each accelerator ring has the capability to accelerate a different specie. Table 1 summarizes the main machine parameters. The RF system on both rings has to be able to capture, accelerate and store up to 120 bunches with an average total bunch intensity of 1.0 × 10 9 particles/bunch for gold ions and 2 × 10 11 for protons. In the case of heavy ions the RF system must capture the particles at injection, accelerate them through transition and transfer the bunches from the 28 MHz system to the 197 MHz system. The 28 MHz accelerating cavities operate with 300 kV before transition and 150 kV throughout the rest of the energy ramp for ions and the 197 MHz system operates with 4 MV total gap voltage. In the case of protons, since the particles are injected above transition, only acceleration and storage is needed and the 28 MHz RF cavity is used with a voltage of 300 kV while the 197 MHz system uses a much smaller voltage of 50 kV only to increase the synchrotron frequency spread and improve Landau damping.

43 PARTICLE ACCELERATORS↗

Diffusion Simulation and Lifetime Calculation at RHIC

The beam lifetime is an important parameter for any storage ring. For protons in RHIC it is dominated by the non-linear nature of the head-on collisions that causes the particles to diffuse outside the stable area in phase space. In this report we show results from diffusion simulation and lifetime calculation for the 2006 and 2008 polarized proton runs in RHIC.

43 PARTICLE ACCELERATORS↗